Jie Qi at the High-Low Tech lab at MIT’s Media Lab, posted a HOWTO on nitinol and origami. In the HOWTO she mentions that you can’t solder the nitinol directly, and so you’ll have to have create a soldering pad for it. (She used a craft crimp bead.) Another tip she gives is the need to preheat the nitinol by running a 9 volt charge through it for five seconds. When the wire relaxes, it will become be longer than it was originally, and so you’ll need to retention the wire. Last of all, she warns against keeping the wire energized too long, lest your “burn out” the nitinol. In another project, Qi mentions she used 0.006 inch flexinol for the origami, but used 0.01 inch for the more rapid vine/snake project.

I have had a fairly long interest in synthetic plants and was thinking if nitinol could be used to in a heliostat or some sort of dinural deployable structure, but I never knew the reaction time of nitinol. Seeing it used understanding what voltages are required was helpful. (Poking around just now, I also ended up finding a handy nitinol wire width-voltage-time-force table.) While I doubt that I will ever actually build whatever vague idea idea I have for synthetic plant, I’ve come to conclusion that nitinol perhaps isn’t the best choice of materials if you want it to hold position for any considerable length of time (or at least not without some sort of mechanical latching).

Previously.

Now this is interesting.

Supermechanical has created a Kickstarter project to manufacture very simple wireless sensors such as sensor, temperature, moisture and switches, people to monitor their surroundings by using a web interface to define rules for when each sensor should alert via SMS, Twitter, or email. Want to know when the dryer shuts off? Put a vibration sensor on it, and you’ll get an email when it’s done.

For decades now, we’ve been promised the smart home, where appliances would interact with each other, but those visions always seemed to involve homeowners replacing all their belonging with new smart appliances that have never arrived. Also, if my experiences with digital home entertainment is any guide, I strongly suspect that homeowners would be left with a selection of mutually incompatible, or barely compatible devices that make me just want to cry. (DLNA, I’m looking at you.)

Even Neil Postman didn’t expect this.

Another feature of the CNN webpage exclusive to the American edition: games! Given this and the numerous examples of US versus the world magazine covers, it makes me wonder if the major media companies are even trying to inform.

Hacker / Fashion designer Diana Eng created a thermographic scarf that reveals snowflakes at temperatures less than 65 degrees fahrenheit. (Video after the jump.)

It reminds me a bit of Hypercolor shirts, but actually pretty cool.

Raspberry Pi aims to be an ultra low cost single board computer for education. While it’s still in preproduction, it cost about $25 and come with 700 Mhz ARM 11 chip with 256 MB of ram, a USB 2.0 port, HDMI with 1080p30 H.264 decompression, an SD slot, ethernet, and general I/O lines, running Linux, and packaged on a board the size of a credit card.

It’s a very interesting platform. I could see replacing my dad’s MiniITX based weather station with one, or perhaps using it for a some other homebrew system.

Of course, this isn’t the only tiny Linux system out there. Gumstix was the first I heard of, and was the platform of choice for bluetooth sniper rifle. Then there was the wall warts, like the SheevaPlug and the GuruPlug, it’s kind of hard to figure out where to actually order those, whether they’re worth the $99. The closest thing to the RaspberryPi, is Texas Instrument and DigiKey’s BeagleBoard. The BeagleBoard is here today, and is a bit beefier with a 1+ GHz ARM chip, but also much more expensive ($89 for the BeagleBone, $135 for the latest board.) Personally, I wouldn’t pay $100 for an embedded system for just hacking around on. If I was more into hardware development and had an application I knew needed the extra speed, them sure maybe, but I just can’t think of any that I would want to make right now.

Thanks Mike!

I know I shared these links like a year ago or so, but apparently I never posted them here.

Click through to PhysOrg if the video doesn’t load.

Ying Liu, et al. from Michael Dickey’s Lab at North Carolina State demonstrate how simply using an inkjet printer to put black lines on shrinky-dinks, one can transform them into a heat activated self-folding material. (Paper.)

The idea is very simple. When a light is shone on the taped up shrinky-dink, the black tape absorbs more energy, and thus the area under the tape heats up faster than the uncovered material. Since shrinky-dinks contract when heated, a hinge is created. By varying the width of the tape, the rate of closure and the resultant angle can be controlled.

Previously.

I now have a Diaspora account, so I figure it’s time to revisit my thoughts about it. Last time I mentioned Diaspora, it was just a kick starter project. A sketch of an idea, but nothing else. Now there’s something to actually look at an interact with.

Diaspora isn’t fun. While it may be a work in progress, it has squandered a lot of momentum, and certain things are just the kind of mistakes you’d expect from four (now three) undergrads with no experience with Internet scale. First, it is incredibly hard to find anyone. Search is slow, and it only return less than 10 hits, with no ability to move beyond the first page of results. If you want to invite your friends, you can either use Facebook, or manually upload your address book one email address at a time. That’s just horrible. It advertises integration with other services (namely Twitter and Facebook) but with the exception of Facebook, it doesn’t access the address book.

Second, while you can follow tags, almost every tag is content free. Why? The first post every account is encouraged to send is, “Hey! I’m #newhere and am interested in #foo, #bar, and #baz!” And so every tag is filled with these #newhere posts. While a welcome-a-total-stranger post may have sounded like a good idea when you have low tens of users, it is obvious this can’t scale, especially when you’re trying to attract many new users.

Third, the stream only supports two types of content: text and pictures. Want to share a link? You can’t. I don’t know quite what to say about that. It’s just weird.

Since I have literally two connections on Diaspora it’s very hard to get anything out of it. Especially since the community features (i.e. tag following) is broken, and quite honesty even when you scroll through 20 #newhere posts just to find one piece of actual content, the content is rather crappy. I don’t blame Diaspora for that though. I blame the Internet.

Exhibit B:

Adam Harvey played with different makeup patterns to defeat facial detection software. Called CV Dazzle – named after the dazzle camouflage of World War I – it basically asymmetric white and black eye black that is intended to confuse the location of the eyes in relation to the mouth.

While interesting, it isn’t a complete privacy system. Even wearing CV Dazzle, the wearer’s image is still stored. I recall seeing online a hoodie that had high intensity IR LEDs sewn around the opening in an attempt to blind cameras, which I would think either works extremely well, or extremely poorly (i.e. providing more light to the wearer’s face, and thus a sharper image) depending on the orientation of the LEDs. Because of this, it seems like going with an old fashioned mask is better solution, unless you’re afraid of being arrested on a trumped up and dubious
anti-mask law, in which case perhaps CV Dazzle isn’t such a bad idea in order circumvent mass surveillance.

Tic-Tac-Tome is a 1400 page policy for playing tic-tac-toe. Like a giant Choose-Your-Own-Adventure, the reader chooses a location to move to, and turns to the appropriate page to see the counter move. Of course, the book plays optimally, and so “the only winning move is not to play.”

The book fits perfectly the Chinese Room argument. In the thought experiment, a Chinese speaker writes messages in chinese and slips them under the door to a locked room. Responses, also written in Chinese get passed back under the door. The responses are so convincing, that the Chinese speaker is convinced he/she is conversing with an intelligence that understands Chinese. Unbeknownst to those outside, a person that does not speak Chinese collects the papers as they slide under the door, consults a giant lookup table of inputs to outputs and then copies the prescribed response to another piece of paper and slides it back, never understanding the inputs or the outputs. The question is then, whether Chinese speaker is conversing with an intelligence or nor, and if so where does the intelligence lie?

Personally, I find the whole “Is it live, or is it Memorex?” argument rather quaint and tiresome. Something that’s only worth discussing while riding in my atomic powered self-driving car while smoking a bowl of the finest hashish. AI always struck me a bit like a magic trick. From the outside, it looks amazing (Wow! You made an orange float in the air! Amazing!), then you find out how it is actually done, and then you’re disappointed because your fantasy has been dashed (You just shoved your thumb in it! You suck!). Personally, I think this says more about us, and our willingness to be misled than anything else.